• Jul 11
    Norton ES2 Plunger Engine Plate Studs, Nuts and Washers Stainless Steel 1948-52

    These are a set of 8 Norton ES2 engine plate studs, nuts, washers and bolts in stainless steel for the plunger model 1948-52. All the studs have the same cycle rate threads as the originals. The nuts are also identical to the originals with the odd hexagon sizes as used by Norton. Most of the studs are 7/16 cycle but not the normal 26 tpi, again specially made for this set. The set is complete with stainless washers and the two special bolts that go above the gearbox. All thread angles are 60 degree as per originals. The bolts and studs have slightly domed ends which can easily be polished to look like chrome or sand blasted for that cadmium look. The flats on the bolts are hand finished to leave a bright finish instead of the dull finish normally found on hex bar. All British thread data can be viewed on our web site. These items are Made in England. The item “Norton ES2 Plunger Engine Plate Studs, Nuts and Washers Stainless Steel 1948-52″ is in sale since Tuesday, July 10, 2018. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “motal9″ and is located in Norfolk. This item can be shipped worldwide.
    • Brand: Motalia
    • Manufacturer Part Number: ES2-eps
    • Classic Motorcycle Part: Yes
    • Country/Region of Manufacture: United Kingdom
    • Intended Use: Replacement Part
  • Jul 11
    Norton ES2 Engine Plate Studs, Nuts and Washers Stainless Steel Rigid

    These are a set of Norton ES2 engine plate studs, nuts and washers in stainless steel for the Rigid models. All the studs have the same cycle rate threads as the originals. The nuts are also identical to the originals with the odd hexagon sizes as used by Norton. Most of the studs are 7/16 cycle but not the normal 26 tpi, again specially made for this set. The set is complete with stainless washers and the two special bolts that go above the gearbox. All thread angles are 60 degree as per originals. The bolts and studs have slightly domed ends which can easily be polished to look like chrome or sand blasted for that cadmium look. The flats on the bolts are hand finished to leave a bright finish instead of the dull finish normally found on hex bar. All British thread data can be viewed on our web site. These items are Made in England. The item “Norton ES2 Engine Plate Studs, Nuts and Washers Stainless Steel Rigid” is in sale since Tuesday, July 10, 2018. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “motal9″ and is located in Norfolk. This item can be shipped worldwide.
    • Brand: Motalia
    • Manufacturer Part Number: ES2-eps
    • Classic Motorcycle Part: Yes
    • Country/Region of Manufacture: United Kingdom
    • Intended Use: Replacement Part
  • Jun 10
    Norton ES2 Plunger Engine Plate Studs, Nuts and Washers Stainless Steel 1948-52

    These are a set of 8 Norton ES2 engine plate studs, nuts, washers and bolts in stainless steel for the plunger model 1948-52. All the studs have the same cycle rate threads as the originals. The nuts are also identical to the originals with the odd hexagon sizes as used by Norton. Most of the studs are 7/16 cycle but not the normal 26 tpi, again specially made for this set. The set is complete with stainless washers and the two special bolts that go above the gearbox. All thread angles are 60 degree as per originals. The bolts and studs have slightly domed ends which can easily be polished to look like chrome or sand blasted for that cadmium look. The flats on the bolts are hand finished to leave a bright finish instead of the dull finish normally found on hex bar. All British thread data can be viewed on our web site. These items are Made in England. The item “Norton ES2 Plunger Engine Plate Studs, Nuts and Washers Stainless Steel 1948-52″ is in sale since Saturday, June 9, 2018. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “motal9″ and is located in Norfolk. This item can be shipped worldwide.
    • Brand: Motalia
    • Manufacturer Part Number: ES2-eps
    • Classic Motorcycle Part: Yes
    • Country/Region of Manufacture: United Kingdom
    • Intended Use: Replacement Part
  • Jun 10
    Norton ES2 Engine Plate Studs, Nuts and Washers Stainless Steel Rigid

    These are a set of Norton ES2 engine plate studs, nuts and washers in stainless steel for the Rigid models. All the studs have the same cycle rate threads as the originals. The nuts are also identical to the originals with the odd hexagon sizes as used by Norton. Most of the studs are 7/16 cycle but not the normal 26 tpi, again specially made for this set. The set is complete with stainless washers and the two special bolts that go above the gearbox. All thread angles are 60 degree as per originals. The bolts and studs have slightly domed ends which can easily be polished to look like chrome or sand blasted for that cadmium look. The flats on the bolts are hand finished to leave a bright finish instead of the dull finish normally found on hex bar. All British thread data can be viewed on our web site. These items are Made in England. The item “Norton ES2 Engine Plate Studs, Nuts and Washers Stainless Steel Rigid” is in sale since Saturday, June 9, 2018. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “motal9″ and is located in Norfolk. This item can be shipped worldwide.
    • Brand: Motalia
    • Manufacturer Part Number: ES2-eps
    • Classic Motorcycle Part: Yes
    • Country/Region of Manufacture: United Kingdom
    • Intended Use: Replacement Part
  • Jun 6
    Norton ES2 Engine Plate Studs, Nuts and Washers Stainless Steel Rigid

    These are a set of Norton ES2 engine plate studs, nuts and washers in stainless steel for the Rigid models. All the studs have the same cycle rate threads as the originals. The nuts are also identical to the originals with the odd hexagon sizes as used by Norton. Most of the studs are 7/16 cycle but not the normal 26 tpi, again specially made for this set. The set is complete with stainless washers and the two special bolts that go above the gearbox. All thread angles are 60 degree as per originals. The bolts and studs have slightly domed ends which can easily be polished to look like chrome or sand blasted for that cadmium look. The flats on the bolts are hand finished to leave a bright finish instead of the dull finish normally found on hex bar. All British thread data can be viewed on our web site. These items are Made in England. The item “Norton ES2 Engine Plate Studs, Nuts and Washers Stainless Steel Rigid” is in sale since Thursday, May 10, 2018. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “motal9″ and is located in Norfolk. This item can be shipped worldwide.
    • Brand: Motalia
    • Manufacturer Part Number: ES2-eps
    • Classic Motorcycle Part: Yes
    • Country/Region of Manufacture: United Kingdom
    • Intended Use: Replacement Part
  • May 11
    Norton ES2 Plunger Engine Plate Studs, Nuts and Washers Stainless Steel 1948-52

    These are a set of 8 Norton ES2 engine plate studs, nuts, washers and bolts in stainless steel for the plunger model 1948-52. All the studs have the same cycle rate threads as the originals. The nuts are also identical to the originals with the odd hexagon sizes as used by Norton. Most of the studs are 7/16 cycle but not the normal 26 tpi, again specially made for this set. The set is complete with stainless washers and the two special bolts that go above the gearbox. All thread angles are 60 degree as per originals. The bolts and studs have slightly domed ends which can easily be polished to look like chrome or sand blasted for that cadmium look. The flats on the bolts are hand finished to leave a bright finish instead of the dull finish normally found on hex bar. All British thread data can be viewed on our web site. These items are Made in England. The item “Norton ES2 Plunger Engine Plate Studs, Nuts and Washers Stainless Steel 1948-52″ is in sale since Thursday, May 10, 2018. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “motal9″ and is located in Norfolk. This item can be shipped worldwide.
    • Brand: Motalia
    • Manufacturer Part Number: ES2-eps
    • Classic Motorcycle Part: Yes
    • Country/Region of Manufacture: United Kingdom
    • Intended Use: Replacement Part
  • Apr 10
    Norton ES2 Plunger Engine Plate Studs, Nuts and Washers Stainless Steel 1948-52

    These are a set of 8 Norton ES2 engine plate studs, nuts, washers and bolts in stainless steel for the plunger model 1948-52. All the studs have the same cycle rate threads as the originals. The nuts are also identical to the originals with the odd hexagon sizes as used by Norton. Most of the studs are 7/16 cycle but not the normal 26 tpi, again specially made for this set. The set is complete with stainless washers and the two special bolts that go above the gearbox. All thread angles are 60 degree as per originals. The bolts and studs have slightly domed ends which can easily be polished to look like chrome or sand blasted for that cadmium look. The flats on the bolts are hand finished to leave a bright finish instead of the dull finish normally found on hex bar. All British thread data can be viewed on our web site. These items are Made in England. The item “Norton ES2 Plunger Engine Plate Studs, Nuts and Washers Stainless Steel 1948-52″ is in sale since Saturday, April 07, 2018. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “motal9″ and is located in Norfolk. This item can be shipped worldwide.
    • Brand: Motalia
    • Manufacturer Part Number: ES2-eps
    • Classic Motorcycle Part: Yes
    • Country/Region of Manufacture: United Kingdom
    • Intended Use: Replacement Part
  • Apr 8
    Norton ES2 Engine Plate Studs, Nuts and Washers Stainless Steel Rigid

    These are a set of Norton ES2 engine plate studs, nuts and washers in stainless steel for the Rigid models. All the studs have the same cycle rate threads as the originals. The nuts are also identical to the originals with the odd hexagon sizes as used by Norton. Most of the studs are 7/16 cycle but not the normal 26 tpi, again specially made for this set. The set is complete with stainless washers and the two special bolts that go above the gearbox. All thread angles are 60 degree as per originals. The bolts and studs have slightly domed ends which can easily be polished to look like chrome or sand blasted for that cadmium look. The flats on the bolts are hand finished to leave a bright finish instead of the dull finish normally found on hex bar. All British thread data can be viewed on our web site. These items are Made in England. The item “Norton ES2 Engine Plate Studs, Nuts and Washers Stainless Steel Rigid” is in sale since Saturday, April 07, 2018. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “motal9″ and is located in Norfolk. This item can be shipped worldwide.
    • Brand: Motalia
    • Manufacturer Part Number: ES2-eps
    • Classic Motorcycle Part: Yes
    • Country/Region of Manufacture: United Kingdom
    • Intended Use: Replacement Part
  • Feb 28
    Norton ES2 Plunger Engine Plate Studs, Nuts and Washers Stainless Steel 1948-52

    These are a set of 8 Norton ES2 engine plate studs, nuts, washers and bolts in stainless steel for the plunger model 1948-52. All the studs have the same cycle rate threads as the originals. The nuts are also identical to the originals with the odd hexagon sizes as used by Norton. Most of the studs are 7/16 cycle but not the normal 26 tpi, again specially made for this set. The set is complete with stainless washers and the two special bolts that go above the gearbox. All thread angles are 60 degree as per originals. The bolts and studs have slightly domed ends which can easily be polished to look like chrome or sand blasted for that cadmium look. The flats on the bolts are hand finished to leave a bright finish instead of the dull finish normally found on hex bar. All British thread data can be viewed on our web site. These items are Made in England. The item “Norton ES2 Plunger Engine Plate Studs, Nuts and Washers Stainless Steel 1948-52″ is in sale since Friday, February 23, 2018. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “motal9″ and is located in Norfolk. This item can be shipped worldwide.
    • Brand: Motalia
    • Manufacturer Part Number: ES2-eps
    • Classic Motorcycle Part: Yes
    • Country/Region of Manufacture: United Kingdom
    • Intended Use: Replacement Part
  • Feb 23
    Norton ES2 Engine Plate Studs, Nuts and Washers Stainless Steel Rigid

    These are a set of Norton ES2 engine plate studs, nuts and washers in stainless steel for the Rigid models. All the studs have the same cycle rate threads as the originals. The nuts are also identical to the originals with the odd hexagon sizes as used by Norton. Most of the studs are 7/16 cycle but not the normal 26 tpi, again specially made for this set. The set is complete with stainless washers and the two special bolts that go above the gearbox. All thread angles are 60 degree as per originals. The bolts and studs have slightly domed ends which can easily be polished to look like chrome or sand blasted for that cadmium look. The flats on the bolts are hand finished to leave a bright finish instead of the dull finish normally found on hex bar. All British thread data can be viewed on our web site. These items are Made in England. The item “Norton ES2 Engine Plate Studs, Nuts and Washers Stainless Steel Rigid” is in sale since Friday, February 23, 2018. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “motal9″ and is located in Norfolk. This item can be shipped worldwide.
    • Brand: Motalia
    • Manufacturer Part Number: ES2-eps
    • Classic Motorcycle Part: Yes
    • Country/Region of Manufacture: United Kingdom
    • Intended Use: Replacement Part


Calendar

July 2018
M T W T F S S
« Jun    
 1
2345678
9101112131415
16171819202122
23242526272829
3031  

Categories