• Jan 20
    Norton ES2 Engine Plate Studs, Nuts and Washers Stainless Steel Rigid

    These are a set of Norton ES2 engine plate studs, nuts and washers in stainless steel for the Rigid models. All the studs have the same cycle rate threads as the originals. The nuts are also identical to the originals with the odd hexagon sizes as used by Norton. Most of the studs are 7/16 cycle but not the normal 26 tpi, again specially made for this set. The set is complete with stainless washers and the two special bolts that go above the gearbox. All thread angles are 60 degree as per originals. The bolts and studs have slightly domed ends which can easily be polished to look like chrome or sand blasted for that cadmium look. The flats on the bolts are hand finished to leave a bright finish instead of the dull finish normally found on hex bar. All British thread data can be viewed on our web site. These items are Made in England. The item “Norton ES2 Engine Plate Studs, Nuts and Washers Stainless Steel Rigid” is in sale since Friday, January 19, 2018. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “motal9″ and is located in Norfolk. This item can be shipped worldwide.
    • Brand: Motalia
    • Manufacturer Part Number: ES2-eps
    • Classic Motorcycle Part: Yes
    • Country/Region of Manufacture: United Kingdom
    • Intended Use: Replacement Part
  • Jan 10
    Norton ES2 Engine Plate Studs, Nuts and Washers Stainless Steel Rigid

    These are a set of Norton ES2 engine plate studs, nuts and washers in stainless steel for the Rigid models. All the studs have the same cycle rate threads as the originals. The nuts are also identical to the originals with the odd hexagon sizes as used by Norton. Most of the studs are 7/16 cycle but not the normal 26 tpi, again specially made for this set. The set is complete with stainless washers and the two special bolts that go above the gearbox. All thread angles are 60 degree as per originals. The bolts and studs have slightly domed ends which can easily be polished to look like chrome or sand blasted for that cadmium look. The flats on the bolts are hand finished to leave a bright finish instead of the dull finish normally found on hex bar. All British thread data can be viewed on our web site. These items are Made in England. The item “Norton ES2 Engine Plate Studs, Nuts and Washers Stainless Steel Rigid” is in sale since Tuesday, December 19, 2017. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “motal9″ and is located in Norfolk. This item can be shipped worldwide.
    • Brand: Motalia
    • Manufacturer Part Number: ES2-eps
    • Classic Motorcycle Part: Yes
    • Country/Region of Manufacture: United Kingdom
    • Intended Use: Replacement Part
  • Dec 30
    4mm Stainless Steel 304 Disc Circle Washer Round Plate Blank Profile ANY SIZE

    4mm thick 304 Grade Stainless steel sheet / plate DISC / CIRCLE / BASE PLATE / SUPPORT MOUNT / BRACKET Available in various sizes. Cut to size as required. Only order what you require. Save time and hassle. FREE Inside hole cut out if required. Precision cut on a CNC Plasma cutting machine. FREE CUTTING TO SIZE! Only order what you need, have it cut to size to avoid time and hassle! How to order a specific size. 1 Pick the piece that will fit your size. 2 In the ORDER NOTES Add the exact OUTSIDE DIAMETER you would like in the order notes, we will send maximum size otherwise. Add the INSIDE DIAMETER you would like of any center hole to be cut out of your piece. Minimum hole size 40mm. IF YOU REQUIRE SQUARE / RECTANGLE PIECES OF THIS STEEL, WE ALSO LIST THESE IN OUR SHOP. Our steel is cut on a CNC Plasma cutting machine, and the edges are then passed through a finishing machine to debur them. Our tolerances are +/- 0.4mm, however are not guaranteed. Sheet size over 750 x 500mm may not have the edges sanded. Ideally cut outs should be at least 30mm in size for best results. The cost of returning the item is the buyers responsibility, and items should be in a unused condition. The item “4mm Stainless Steel 304 Disc Circle Washer Round Plate Blank Profile ANY SIZE” is in sale since Saturday, August 01, 2015. This item is in the category “Business, Office & Industrial\Metalworking/Milling/Welding\Metalworking Supplies”. The seller is “lakelandsteel” and is located in Colthouse, Cumbria. This item can be shipped to European Union member countries, Australia, United States, Canada, Brazil, Japan, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Chile.
    • Brand: Lakeland Steel Ltd
    • MPN: Stainless Steel 304
  • Dec 8
    Norton ES2 Engine Plate Studs, Nuts and Washers Stainless Steel Rigid

    These are a set of Norton ES2 engine plate studs, nuts and washers in stainless steel for the Rigid models. All the studs have the same cycle rate threads as the originals. The nuts are also identical to the originals with the odd hexagon sizes as used by Norton. Most of the studs are 7/16 cycle but not the normal 26 tpi, again specially made for this set. The set is complete with stainless washers and the two special bolts that go above the gearbox. All thread angles are 60 degree as per originals. The bolts and studs have slightly domed ends which can easily be polished to look like chrome or sand blasted for that cadmium look. The flats on the bolts are hand finished to leave a bright finish instead of the dull finish normally found on hex bar. All British thread data can be viewed on our web site. These items are Made in England. The item “Norton ES2 Engine Plate Studs, Nuts and Washers Stainless Steel Rigid” is in sale since Saturday, November 18, 2017. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “motal9″ and is located in Norfolk. This item can be shipped worldwide.
    • Brand: Motalia
    • Manufacturer Part Number: ES2-eps
    • Classic Motorcycle Part: Yes
    • Country/Region of Manufacture: United Kingdom
  • Nov 27
    Norton ES2 Plunger Engine Plate Studs, Nuts and Washers Stainless Steel 1948-52

    These are a set of 8 Norton ES2 engine plate studs, nuts, washers and bolts in stainless steel for the plunger model 1948-52. All the studs have the same cycle rate threads as the originals. The nuts are also identical to the originals with the odd hexagon sizes as used by Norton. Most of the studs are 7/16 cycle but not the normal 26 tpi, again specially made for this set. The set is complete with stainless washers and the two special bolts that go above the gearbox. All thread angles are 60 degree as per originals. The bolts and studs have slightly domed ends which can easily be polished to look like chrome or sand blasted for that cadmium look. The flats on the bolts are hand finished to leave a bright finish instead of the dull finish normally found on hex bar. All British thread data can be viewed on our web site. These items are Made in England. The item “Norton ES2 Plunger Engine Plate Studs, Nuts and Washers Stainless Steel 1948-52″ is in sale since Saturday, November 18, 2017. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “motal9″ and is located in Norfolk. This item can be shipped worldwide.
    • Brand: Motalia
    • Manufacturer Part Number: ES2-eps
    • Classic Motorcycle Part: Yes
    • Country/Region of Manufacture: United Kingdom
  • Nov 25
    A4 Square Plate Washers 50mm x 50mm x 3mm Thick, use with coach screws or bolts

    A4 Square Plate Washers 50mm x 50mm x 3mm Thick, use with coach screws or bolts. A4 MARINE GRADE Stainless Steel. Used in a wide variety of applications and situations, Ideal in conjuction with Screws and Bolts. Commonly used in architectural metalwork, marine applications, model making, furniture (garden and home) and many others practical applications. Various steel grades available including: BZP, A2 Stainless Steel & A4 Marine Grade Stainless Steel. Please choose your required size from the drop down options in this advert. We also have a large range of metals and fasteners available. Please visit us again soon we will be listing many new items in the future. We also stock A2, A4 Threaded bar, Aluminium Bar, Copper Bar, Free Cutting Service. We will always go out of our way to source the product you are looking for. Thank you for visiting our shop. We offer a large range of Metals to for many applications. We offer a large range of metals, ranging from Zinc Plated Threaded Bars to Marine Grade Stainless Steel Round Bars. Also Fasteners, Tools & Fixings for just about every DIY application. We offer advice about products and offer a service to meet individual needs. We stock Zinc, Self Colour A2 & A4 Marine Grade Metal Grades including Threaded Bar, Aluminium Bar & Tube, Copper Bar, Coil and Tubes in stainless Steel and a variety of similar metals. We are confident that you will be happy with the quality of our products. Please note that customized/personalized items are not returnable unless we have made an error. Please return items in its original form and packaging within 14 days of the received date. Made with love by. The item “A4 Square Plate Washers 50mm x 50mm x 3mm Thick, use with coach screws or bolts” is in sale since Saturday, June 28, 2014. This item is in the category “Business, Office & Industrial\Fasteners & Hardware\Other Fasteners & Hardware”. The seller is “mr-metals” and is located in Truro. This item can be shipped worldwide.
    • Brand: MR METALS
    • MPN: A4 Stainless Steel Washers
    • Unit Quantity: Each
    • Unit Type: Unit
  • Nov 12
    12mm Stainless Steel 304 Disc Circle Washer Round Plate Blank Profile ANY SIZE

    12mm thick 304 Grade Stainless steel sheet / plate DISC / CIRCLE / BASE PLATE / SUPPORT MOUNT / BRACKET Available in various sizes. Cut to size as required. Only order what you require. Save time and hassle. FREE Inside hole cut out if required. Precision cut on a CNC Plasma cutting machine. FREE CUTTING TO SIZE! Only order what you need, have it cut to size to avoid time and hassle! How to order a specific size. 1 Pick the piece that will fit your size. 2 In the ORDER NOTES Add the exact OUTSIDE DIAMETER you would like in the order notes, we will send maximum size otherwise. Add the INSIDE DIAMETER you would like of any center hole to be cut out of your piece. Minimum hole size 40mm. IF YOU REQUIRE SQUARE / RECTANGLE PIECES OF THIS STEEL, WE ALSO LIST THESE IN OUR SHOP. Our steel is cut on a CNC Plasma cutting machine, and the edges are then passed through a finishing machine to debur them. Our tolerances are +/- 0.4mm, however are not guaranteed. Sheet size over 750 x 500mm may not have the edges sanded. Ideally cut outs should be at least 30mm in size for best results. The cost of returning the item is the buyers responsibility, and items should be in a unused condition. The item “12mm Stainless Steel 304 Disc Circle Washer Round Plate Blank Profile ANY SIZE” is in sale since Friday, January 15, 2016. This item is in the category “Business, Office & Industrial\Metalworking/Milling/Welding\Metalworking Supplies”. The seller is “lakelandsteel” and is located in Colthouse, Cumbria. This item can be shipped to European Union member countries, Australia, United States, Canada, Brazil, Japan, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Chile.
    • Brand: Lakeland Steel Ltd
    • MPN: Stainless Steel 304


Calendar

January 2018
M T W T F S S
« Dec    
1234567
891011121314
15161718192021
22232425262728
293031  

Categories

Recent Search Terms