• Apr 19
    #14 Hex Washer Head Self Drilling Sheet Metal Tek Screws 410 Stainless Steel

    #14 Hex Washer Head Self Drilling Sheet Metal Tek Screws 410 Stainless Steel

    #14 Hex Washer Head Self Drilling Sheet Metal Tek Screws 410 Stainless Steel

    #14 Hex Washer Head Self Drilling Sheet Metal Tek Screws 410 Stainless Steel

    #14 Hex Washer Head Self Drilling Sheet Metal Tek Screws 410 Stainless Steel

    #14 Hex Washer Head Self Drilling Sheet Metal Tek Screws 410 Stainless Steel

    #14 Hex Washer Head Self Drilling Sheet Metal Screws 410 Stainless Steel Choose your Length and Quantity. Fastenere Self-Drilling Screws, also known as Tek screws, eliminate the need for a pre-drilled hole. The length of the drill point determines the material thickness which the screw can reliably penetrate. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined. These sheet metal screws are highly versatile and are used to attached metal, wood, fiberglass and plastic. The sharp threads draw material together and ensure a secure hold. Head Style : Hex Washer. Drive Style : External Hex. Length : Select Desired Length in Drop Down Menu. Quantity of Fasteners in Package : Select Desired Item Package Quantity in Drop Down Menu. Head Width Flat to Flat : 3/8. Flange Diameter : 0.432. Head Height : 0.240. Thread Diameter : 0.250. Thread Coverage : Full Thread. Point Style : Self Drilling. Drill Point size : #3 (5/16). Max Drilling Thickness : 0.210. Hex washer head self drilling screws have a drill point at the tip of the thread drills its own pilot hole in to metal allowing for quick installation and fastening while saving time and effort with just a single step. Made from an ultra strong stainless steel grade 410 giving them the ability to drill through sheet metal and stainless steel while still being wear resistant and offering a mild chemical corrosion protection; these screws are not intended for use with aluminum as the higher iron content in the fastener will cause embrittlement; 410 Stainless steel is always MAGNETIC due to the higher iron content giving the drilling capabilities. These screws have a hex head that can be driven with a nut driver or socket and can be adjusted with a wrench; the built in flanged washer adds a secure grip to the material being fastened into while also preventing the head from crushing thin metal. The self drilling point also referred to as a tek can self drill metal up to a thickness of 0.210 inches and is best used with a lot of pressure and a slow drill speed; if drilling too fast you could run the risk of over heating the metal drilling tip which could cause it to wear out or warp. Fastenere brand self drilling tapping screws will tap their own thread into the material being screwed into creating a long lasting vibration resistant connection that is the choice for use with corrugated roof siding and sheet metal applications. Tracking is provided on ALL Orders. UPS Next Day Air is available, Please inquire for pricing. For YOU, we constantly strive to find ways of improving our performance. The item “#14 Hex Washer Head Self Drilling Sheet Metal Tek Screws 410 Stainless Steel” is in sale since Thursday, July 13, 2017. This item is in the category “Business & Industrial\Fasteners & Hardware\Screws & Bolts”. The seller is “lightningstainless” and is located in West Hempstead, New York. This item can be shipped worldwide.
    • Brand: Fastenere
    • Fastener Type: Sheet Metal Screw
    • Drive Type: External Socket Drive
    • Head Style: Hex Washer Head
    • MPN: HWHSD410SS #14
    • Grade: 410
    • Material: Stainless Steel
    • Thread Diameter (in.): 0.250″
    • Model: Hex Washer Head Self Drilling Sheet Metal Screw
    • Drive Style: Socket
    • Thread Size Base: #14
  • Apr 17
    #10 Metal Roof Siding Screw Stainless Steel Roofing Screws withEPDM Washer QTY1000

    #10 Metal Roof Siding Screw Stainless Steel Roofing Screws withEPDM Washer QTY1000

    Stainless Steel Roofing and Siding Screws Hex Washer Head with EPDM Washer. Roofing and Siding Self Drilling Screws. #10 (Major 0.189″, Minor 0.141″). Hex Washer w/EPDM Rubber. Max 0.144 – Min 0.143 w/Washer. Self Driller TEK #: 3 (0.333 Long). Stainless Steel Roofing Self Drilling Screws. Hex washer head self drilling screws with EPDM rubber metal beaked washer for metal roofing and siding. Features a TEK drill point. Used for attaching metal roofing and siding panels to metal stud framing. Normally fully threaded minus the drill point. The EPDM (Ethylene Propylene Diene Monomer) rubber which has a wide range of application. This is the best rubber for metal building and siding applications to stop water from entering the building with long life spans. Hex washer head self-drill with EPDM rubber metal beaked washer for metal roofing and siding The hex washer head self-drill come with a drill point (TEK) for attaching metal roofing and siding panels to metal stud framing. They are normally fully threaded minus the drill point. TEK self-drills are based on the thickness of the metal you are penetrating, the typical 25 to 16 gauge will use a TEK 3. The EPDM (Ethylene Propylene Diene Monomer) rubber which has a wide range of applications, is the best rubber for metal building and siding applications to stop water from entering the building with long life spans. The fastener and metal backed washer are made from 410 stainless steel. To go green and reduce our use of plastic all product quantities will be packaged in as few packages as possible. Listing photo is generic for the fastener type listed in this listing and is not to scale. Please refer to the description for fastener details. We will respond with the requested information quickly. You may contact customer service M-F 8AM to 4PM Standard Eastern Time. The item “#10 Metal Roof Siding Screw Stainless Steel Roofing Screws withEPDM Washer QTY1000″ is in sale since Tuesday, January 16, 2018. This item is in the category “Business & Industrial\Fasteners & Hardware\Screws & Bolts”. The seller is “albanycountyfasteners-ny” and is located in Sayreville, New Jersey. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Australia, South africa, New Zealand, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bermuda, Bolivia, Ecuador, Egypt, French guiana, Guadeloupe, Cayman islands, Martinique, Nicaragua, Peru, Paraguay, Reunion.
    • Brand: Albany County Fasteners
    • Model: Roofing Screw
    • MPN: Does Not Apply
    • Material: Stainless Steel
    • Head Style: Hex Washer Head
    • Grade: 410
    • Thread Diameter (in.): #10
    • Thread Count (TPI): 16
    • Fastener Type: Roofing Screw
    • Drive Type: External Hex
    • Thread Diameter Major: 0.189″
    • Thread Diameter Minor: 0.141″
    • Thread Direction: Right Hand
    • Point Type: TEK
    • Driver Size: 5/16″
    • Other: Includes Stainless Steel Neoprene EPDM Washer
    • Quantity: 1,000
  • Apr 9
    Qty= 23 lbs Mixed Lot Stainless Steel Hex Bolts Screws washers Nuts, Many sizes

    Qty= 23 lbs Mixed Lot Stainless Steel Hex Bolts Screws washers Nuts, Many sizes

    Qty= 23 lbs Mixed Lot Stainless Steel Hex Bolts Screws washers Nuts, Many sizes

    Qty= 23 lbs Mixed Lot Stainless Steel Hex Bolts Screws washers Nuts, Many sizes

    Qty= 23 lbs Mixed Lot Stainless Steel Hex Bolts Screws washers Nuts, Many sizes

    Qty= 23 lbs Mixed Lot Stainless Steel Hex Bolts Screws washers Nuts, Many sizes

    Includes only what is shown in the picture. The Ă¢SellerĂ¢ is defined as West Place, LLC. No PO Boxes, APO, FPO or similar addresses. All other locations will be charged extra. In the event that any clauses or phrases contained here within are ruled out by a judge, the law, a lawyer, jurors, and or any other entity all others remain in effect. Most boxes have been opened for inspection and photos. If items are listed as new they may not come with original packaging. The item “Qty= 23 lbs Mixed Lot Stainless Steel Hex Bolts Screws washers Nuts, Many sizes” is in sale since Sunday, November 19, 2017. This item is in the category “Business & Industrial\Other Business & Industrial”. The seller is “industrysales” and is located in Atchison, Kansas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion.
    • Brand: Does Not Apply
    • Model: Does Not Apply
    • MPN: Does Not Apply
  • Apr 4
    1000 #12 x 1-1/4 Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM

    1000 #12 x 1-1/4 Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM

    1000 #12 x 1-1/4 Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM

    (1,000) #12 x 1-1/4 Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM Rubber Washer. The item “1000 #12 x 1-1/4 Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM” is in sale since Wednesday, July 12, 2017. This item is in the category “Business & Industrial\Fasteners & Hardware\Screws & Bolts”. The seller is “reddingfasteners” and is located in Redding, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion.
    • Brand: Brighton
    • Fastener Type: Roofing Siding Self Driller Screws
    • Drive Type: 5/16″
    • Head Style: Hex Washer w/EPDM Rubber
    • MPN: SDSWW-SS-12114
    • Grade: 410 Stainless Steel
    • Material: Stainless Steel
    • Thread Diameter (in.): #12
    • Length (in.): 1-1/4in.
    • Thread Count (TPI): 14
  • Apr 2
    QTY 1000 #8 x 1 Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM

    QTY 1000 #8 x 1 Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM

    QTY 1000 #8 x 1 Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM

    (QTY 1000) #8 x 1 Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM Rubber Washer. The item “QTY 1000 #8 x 1 Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM” is in sale since Wednesday, July 19, 2017. This item is in the category “Business & Industrial\Fasteners & Hardware\Screws & Bolts”. The seller is “reddingfasteners” and is located in Redding, California. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Russian federation, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion.
    • Brand: Brighton
    • Fastener Type: Roofing Siding Self Driller Screws
    • Drive Type: 1/4″
    • Head Style: Hex Washer w/EPDM Rubber
    • MPN: SDSWW-SS-81
    • Grade: 410 Stainless Steel
    • Material: Stainless Steel
    • Thread Diameter (in.): #8
    • Length (in.): 1in.
    • Thread Count (TPI): 18
  • Mar 27
    Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM 10 x 2 1000PC

    Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM 10 x 2 1000PC

    Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM 10 x 2 1000PC. Roofing Siding Self Driller Screws. Hex Washer w/EPDM Rubber. Max 0.144 – Min. Self Driller TEK #: 3 (0.333 Long). Hex washer head self-drill with EPDM rubber metal beaked washer for metal roofing and siding The hex washer head self-drill come with a drill point (TEK) for attaching metal roofing and siding panels to metal stud framing. They are normally fully threaded minus the drill point. TEK self-drills are based on the thickness of the metal you are penetrating, the typical 25 to 16 gauge will use a TEK 3. The EPDM (Ethylene Propylene Diene Monomer) rubber which has a wide range of applications, is the best rubber for metal building and siding applications to stop water from entering the building with long life spans. The fastener and metal backed washer are made from 410 stainless steel. To go green and reduce our use of plastic all product quantities will be packaged in as few packages as possible. Listing photo is generic for the fastener type listed in this listing and is not to scale. Please refer to the description for fastener details. We will respond with the requested information quickly. You may contact customer service M-F 8AM to 4PM Standard Eastern Time via the following contact information. Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution. The item “Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM 10 x 2 1000PC” is in sale since Tuesday, May 30, 2017. This item is in the category “Business & Industrial\Fasteners & Hardware\Screws & Bolts”. The seller is “albanycountyfasteners-ny” and is located in Sayreville, New Jersey. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Australia, South africa, New Zealand, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bermuda, Bolivia, Ecuador, Egypt, French guiana, Guadeloupe, Cayman islands, Martinique, Nicaragua, Peru, Paraguay, Reunion.
    • Length (in.): 2″
    • Thread Count (TPI): 16 Per Inch
    • Thread Diameter (in.): #10
    • Material: Stainless Steel
    • Grade: 410 Stainless Steel
    • Head Style: Hex Washer w/EPDM Rubber
    • MPN: 2000-0000-4676
    • Drive Type: 5/16″
    • Brand: Albany County Fasteners
    • Fastener Type: Roofing Siding Self Driller Screws
  • Mar 26
    1000 #14 x 3/4 Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM

    1000 #14 x 3/4 Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM

    1000 #14 x 3/4 Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM

    QTY 1,000 #14 x 3/4 Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM Rubber Washer. The item “1000 #14 x 3/4 Stainless Steel Roofing Siding Screws Hex Washer Head TEK EPDM” is in sale since Wednesday, July 19, 2017. This item is in the category “Business & Industrial\Fasteners & Hardware\Screws & Bolts”. The seller is “reddingfasteners” and is located in Redding, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion.
    • Brand: Brighton
    • Fastener Type: Roofing Siding Self Driller Screws
    • Drive Type: 3/8″
    • Head Style: Hex Washer w/EPDM Rubber
    • MPN: SDSWW-SS-1434
    • Grade: 410 Stainless Steel
    • Material: Stainless Steel
    • Thread Diameter (in.): 1/4in.
    • Length (in.): 3/4in.
    • Thread Count (TPI): 14
  • Mar 23
    #12 Hex Washer Head Self Drilling Sheet Metal Tek Screws 410 Stainless Steel

    #12 Hex Washer Head Self Drilling Sheet Metal Tek Screws 410 Stainless Steel

    #12 Hex Washer Head Self Drilling Sheet Metal Tek Screws 410 Stainless Steel

    #12 Hex Washer Head Self Drilling Sheet Metal Tek Screws 410 Stainless Steel

    #12 Hex Washer Head Self Drilling Sheet Metal Tek Screws 410 Stainless Steel

    #12 Hex Washer Head Self Drilling Sheet Metal Tek Screws 410 Stainless Steel

    #12 Hex Washer Head Self Drilling Sheet Metal Screws 410 Stainless Steel Choose your Length and Quantity. Fastenere Self-Drilling Screws, also known as Tek screws, eliminate the need for a pre-drilled hole. The length of the drill point determines the material thickness which the screw can reliably penetrate. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined. These sheet metal screws are highly versatile and are used to attached metal, wood, fiberglass and plastic. The sharp threads draw material together and ensure a secure hold. Head Style : Hex Washer. Drive Style : External Hex. Length : Select Desired Length in Drop Down Menu. Quantity of Fasteners in Package : Select Desired Item Package Quantity in Drop Down Menu. Head Width Flat to Flat : 5/16. Flange Diameter : 0.432. Head Height : 0.194. Thread Diameter : 0.216. Thread Coverage : Full Thread. Point Style : Self Drilling. Drill Point size : #3 (9/32). Max Drilling Thickness : 0.187. Hex washer head self drilling screws have a drill point at the tip of the thread drills its own pilot hole in to metal allowing for quick installation and fastening while saving time and effort with just a single step. Made from an ultra strong stainless steel grade 410 giving them the ability to drill through sheet metal and stainless steel while still being wear resistant and offering a mild chemical corrosion protection; these screws are not intended for use with aluminum as the higher iron content in the fastener will cause embrittlement; 410 Stainless steel is always MAGNETIC due to the higher iron content giving the drilling capabilities. These screws have a hex head that can be driven with a nut driver or socket and can be adjusted with a wrench; the built in flanged washer adds a secure grip to the material being fastened into while also preventing the head from crushing thin metal. The self drilling point also referred to as a tek can self drill metal up to a thickness of 0.187 inches and is best used with a lot of pressure and a slow drill speed; if drilling too fast you could run the risk of over heating the metal drilling tip which could cause it to wear out or warp. Fastenere brand self drilling tapping screws will tap their own thread into the material being screwed into creating a long lasting vibration resistant connection that is the choice for use with corrugated roof siding and sheet metal applications. Tracking is provided on ALL Orders. UPS Next Day Air is available, Please inquire for pricing. For YOU, we constantly strive to find ways of improving our performance. The item “#12 Hex Washer Head Self Drilling Sheet Metal Tek Screws 410 Stainless Steel” is in sale since Thursday, July 13, 2017. This item is in the category “Business & Industrial\Fasteners & Hardware\Screws & Bolts”. The seller is “lightningstainless” and is located in West Hempstead, New York. This item can be shipped worldwide.
    • Brand: Fastenere
    • Fastener Type: Sheet Metal Screw
    • Drive Type: External Socket Drive
    • Head Style: Hex Washer Head
    • MPN: HWHSD410SS #12
    • Grade: 410
    • Material: Stainless Steel
    • Thread Diameter (in.): 0.216″
    • Model: Hex Washer Head Self Drilling Sheet Metal Screw
    • Drive Style: Socket
    • Thread Size Base: #12
  • Mar 21
  • Mar 20
    Solid Stainless Steel Countersink Wood Finish Screws with Washers Pozi Pozidriv

    Solid Stainless Steel Countersink Wood Finish Screws with Washers Pozi Pozidriv

    Solid Stainless Steel Countersink Wood Finish Screws with Washers Pozi Pozidriv

    Solid Stainless Steel Countersink Wood Finish Screws with Washers Pozi Pozidriv

    Solid Stainless Steel Countersink Wood Finish Screws with Washers Pozi Pozidriv

    Solid Stainless Steel Countersink Wood Finish Screws with Washers Pozi Pozidriv

    Solid Stainless Steel Countersink Wood Finish Screws with Washers Pozi Pozidriv

    Solid Stainless Steel Countersink Wood Finish Screws with Washers Pozi Pozidriv

    Solid Stainless Steel Countersink Wood Finish Screws with Washers Pozi Pozidriv

    Solid Stainless Steel Countersink Wood Finish Screws with Washers Pozi Pozidriv. Add the perfect finishing touch to any project with our new stainless steel finishing hardware. Our finish screw and washer packs provide the perfect addition to any woodworking project, signage, cabinetry, or really anything that needs screws! The stainless steel Pozidriv screws feature a decorative raised head and are made from the same A2-70 stainless as our washers. The washers are precisely machined from solid stainless steel. Compare our washers to the competition and see the difference! Why a Pozidriv screw instead of a Phillips? Pozidriv screws and the bits that drive them feature a greater amount of positive. Thus more torque can be applied to them without. What is cam out you ask? Cam out is when the bit twists up and out of the screw head once a certain amount of torque is reached. This is what a Phillips screw/bit often does. Camming out can lead to striped and damaged heads or even broken screwdrivers. Because of this, we opted for the Pozidriv head screws to eliminate this issue entirely. Once you start using the Pozidriv screws, you will agree. Raised head height: 1.5mm. Inside diameter: 6.4mm. Each order will include a FREE PZ3 insert bit for installation! This bit will insure a tight. Need a different length, size, or type of screw? Need wood or machine threads? We can provide a wide range of drive head styles and lengths to fit most any need! We offer a wide variety of quantities as well as wholesale pricing on large orders, so please make offers! Shop The Auto Shack. Belts, Hoses & Pulleys. Brakes, Rotors, Pads, & Shoes. Everything Else At Home. Metric Nuts, Bolts, Washers. Standard Nuts, Bolts, Washers. Wheels, Rims & Tires. Tracking information is always provided as soon as your order ships. _gsrx_vers_811 GS 7.0.9 (811). The item “Solid Stainless Steel Countersink Wood Finish Screws with Washers Pozi Pozidriv” is in sale since Sunday, April 09, 2017. This item is in the category “Business & Industrial\Fasteners & Hardware\Screws & Bolts”. The seller is “jonsautoshack” and is located in Nampa, Idaho. This item can be shipped to United States, Canada, United Kingdom, Japan, Australia.
    • Brand: Jon’s Auto Shack
    • Fastener Type: Wood Screw
    • Drive Type: Pozidriv
    • Head Style: Raised
    • Material: Stainless Steel
    • Length (in.): 1-3/4in.
    • Thread Diameter (mm.): 6mm (M6)
    • Country/Region of Manufacture: Germany
    • Featured Refinements: Wood Screws
    • MPN: Does Not Apply


Calendar

April 2018
M T W T F S S
« Mar    
 1
2345678
9101112131415
16171819202122
23242526272829
30  

Categories